PolySave
Siljan PolySave installed year 2000
together with a RotoMaster drum thickener SF17, installed during 1998. The installation of a Siljan PolySave resulted in 25-50 % lower polymer consumption,
substantially reduced need for operator attention and a more uniform DS-content of the outgoing sludge (to be used in the digester).
Siljan PolySave installed year 2001
together with a RotoMaster drum thickener SF17, installed during 1989; The installation of a Siljan PolySave resulted in at least 25 % lower polymer consumption, substantially reduced need for operator attention and a more uniform DS-content of the outgoing sludge (to be used in the digester).
Siljan PolySave was installed year 2003 together with a drum thickener (of other make than Siljan RotoMaster) installed the year before; The thickener unit had a malfunctioning control system; The installation of a Siljan PolySave resulted in a sludge thickening operation without problems.
Siljan PolySave was installed year 2004 together with a RotoMaster drum thickener SF3, in a small scale waste water treatment plant; The sludge thickening system has a stable operation and is continously running very well, with low polymer consumption and low requirement of operator maintenance.
Siljan PolySave installed year 2002 together with a Siljan RotoMaster SF17; The installation of a Siljan PolySave resulted in lower polymer consumption, reduced operator maintenance and a more uniform DS-content of the outgoing sludge.
Two Siljan PolySave units were installed year 2001 together with two Siljan RotoMaster SF17 units; The installation has worked very well with low maintenance requirement, low polymer consumption and a uniform DS-content of the outgoing sludge.
Siljan PolySave installed year 2001 together with a Siljan RotoMaster SF 7; The need for sludge thickening was primarily during summer, with a large number of tourists. The installation resulted in efficient sludge thickening and low maintenance requirements.
Siljan PolySave was installed in year 2003 together with a Siljan RotoMaster drum thickener SF 17 before a digester in a small scale waste water treatment plant; The sludge thickening has worked very well, with a low polymer consumption and a thickening result with good control.
Siljan PolySave was installed year 2004 together with a Siljan RotoMaster drum thickener SF 17; This equipment replaced a grating type of thickener, not working very well. The installation of Siljan PolySave+RotoMaster resulted in a substantially more efficient thickening operation compared to the previous equipment.
Siljan PolySave installed year 2007 together with a Siljan RotoMaster drum thickener SF 3, in a small scale waste water treatment plant on an island in the archipelago of Stockholm; The result was a thickening system yielding an efficient thickening operation requiring a minimum of space for the installation and operator maintenance.
Siljan PolySave installed year 2006 together with a Siljan RotoMaster drum thickener SF 7+; Also this installation resulted in a compact unit requiring a minimum of maintenance.
Siljan PolySave installed year 2004 together with a Siljan RotoMaster drum thickener SF 7; The installation resulted, also in this case, in a unit with small requirements regarding space and maintenance.
Siljan PolySave installed year 2006 together with a Siljan RotoMaster drum thickener SF 7; The installation gave a compact unit with low maintenance costs as well as savings of the expensive polymer.
Siljan PolySave installed year 2008 together with a Siljan RotoMaster drum thickener SF 3, in a small scale waste water treatment plant in the small town of Norrhult; The result was a thickening system yielding an efficient thickening, saving operation hours in the centrifuge as well as operators attention.
| Siljan Allards AB, Phone +46(0)248-125
35 Fax +46(0)248-137 85 |
|
| E-mail info@siljanallards.com www.siljanallards.com |
PolySave